Timber Stairs Brisbane: External Timber Stairs Guide

Guides

Timber Stairs in Brisbane: A Guide to External Timber Stairs

Timber stairs for Brisbane homes: when to repair or replace, hardwood or treated pine, paint or oil, and what a stair build involves from quote to handover.

Need a flight built or replaced rather than explained? We build external stairs in Brisbane: measured, set out to code and quoted by Ben.

Timber stairs are part of how Brisbane houses work. A raised Queenslander or a high-set home relies on its front and back stairs every day, and those stairs spend their whole life in the sun and rain. This guide covers the decisions that come with external timber stairs in Brisbane: whether to repair or replace, which timber to use, how to finish it, and what the build involves.

Repair or replace your timber stairs?

Old painted external timber stairs with rot showing in the stringers and posts

Start with the stringers, the two sloping timbers that carry the flight, and the posts. Worn or split treads on sound stringers can be replaced as a repair. Rot in the stringers or posts, or a flight that moves when you walk on it, means the structure has gone and a new flight is the safe answer.

Signs worth a closer look:

  • Soft or flaking timber where the treads meet the stringers
  • Dark staining or rot at the foot of the stringers and posts, where water sits
  • Treads that rock or have split along the grain
  • A handrail or balustrade that moves under your hand
  • Rusted bolts and brackets

Small fixes are covered by our carpentry repairs service. If you are not sure which side of the line your stairs fall on, Ben can tell you at a walk-through.

Choosing timber for stairs in Brisbane

Hardwood

Australian hardwoods are rated for natural durability from Class 1 (very durable) to Class 4 (non-durable). Spotted gum, ironbark and tallowwood are Class 1, and blackbutt is Class 2. WoodSolutions, the timber industry's information service, puts the expected life of a Class 1 timber at more than 40 years above ground, given good detailing and maintenance. Its natural durability ratings list each species.

Treated pine

Treated pine is a softwood protected by preservative. It is graded by hazard level: H3 for timber above the ground, H4 for timber close to the ground and H5 for posts set in it. It is lighter and easier to work than hardwood and, like any timber outdoors, lasts longer when its finish is kept up.

The details that matter more than the species

Whichever timber is used, the same details decide how long stairs last in Brisbane's humidity: stringers and posts held off the soil on footings or steel stirrups, hot-dip galvanised or stainless steel fixings, sealed end grain, and treads that drain.

Paint or oil?

Painted stairs suit Queenslanders and other character homes, where the stairs usually match the verandah. Paint protects well while the film is intact, and needs attention as soon as it cracks, because water that gets behind paint stays there. Oiled or stained hardwood shows the grain and is simpler to recoat, but in full sun it needs recoating more often.

The rules timber stairs have to meet

External stairs on a house are covered by the National Construction Code. Risers must be between 115 mm and 190 mm and goings between 240 mm and 355 mm, every step in a flight has to match, and a flight can have no more than 18 risers before a landing. Where someone could fall 1 m or more, a balustrade is required, with no gap a 125 mm sphere can pass through. Our guide to building external timber stairs has the full list and a worked example. The stair calculator fits any rise to those limits.

Building approval in Queensland comes from a building certifier. Repairs that leave structural components alone do not need it, while a new or fully replaced flight should be checked with a certifier first. Brisbane City Council's guidance on decks and decking approvals covers the planning side for homes in the Traditional building character overlay. Our approval guide for decks and stairs goes through it job by job.

What a timber stair build involves

  1. Walk-through and measure. Ben visits, measures the rise and checks what the stairs land on and hang off.
  2. Written quote. A clear written quote for the stairs you talked through.
  3. Scope and schedule. Materials, timeline and start date agreed before anything begins.
  4. The build. The old flight comes out and the new stairs go in, with Ben and the crew on site.
  5. Handover. We walk the finished stairs with you and leave the site clean.

Questions to ask a stair builder

  • Is the business QBCC licensed? Any licence can be checked on the QBCC website.
  • Who measures and sets out the stairs, and will that person be on site?
  • Which timber and fixings are in the quote, and why?
  • How are the stringers and posts kept off the ground?
  • Who arranges the building certifier if the job needs one?
  • Is the quote in writing?

Timber stairs built in Brisbane

Bernard Building builds and replaces external timber stairs across Brisbane under QBCC licence 15357497. Ben Bernard quotes every job himself and sets each flight out to the code before any timber is cut. See our external stairs service or get a quote.

More guides from the tools

Planning the job itself? Start with our external stairs service page.

FAQs

Questions we hear

What is the best timber for stairs in Brisbane?

Class 1 hardwoods such as spotted gum, ironbark and tallowwood are rated very durable outdoors. Treated pine graded H3 or higher is the softwood option. Either way, keeping the timber off the ground and using galvanised or stainless fixings matters as much as the species.

How long do timber stairs last outdoors?

It depends on the timber, the detailing and the upkeep. WoodSolutions puts a Class 1 hardwood at more than 40 years above ground and a Class 2 hardwood at 15 to 40 years, given good detailing and maintenance.

Can timber stairs be repaired instead of replaced?

Often, yes. Worn or split treads on sound stringers can be replaced. Rot or movement in the stringers or posts usually means the flight needs replacing.

Should external timber stairs be painted or oiled?

Paint suits character homes and protects well until the film cracks. Oil or stain shows the grain and is simpler to recoat, but needs recoating more often in full sun.

Do timber stairs need approval in Brisbane?

Building approval comes from a building certifier. Repairs that do not touch structural components can go ahead without it, while a new or fully replaced flight should be checked with a certifier first.

Get a quote

Talk to Ben about your job.

If this guide raised questions about your own place, a call or an email gets a walk-through booked. Serving 36 suburbs across Brisbane, from The Gap and Ashgrove through to Kedron.

Hours
Mon to Thu 6:30am to 8pm
Fri and Sat 6:30am to 4:30pm
Sun closed
Licence
QBCC 15357497

The job sheet

Send your job through.

What do you need? (tick any)

Prefer to talk? Call 0430 705 916 or email ben@bernardbuilding.com.au.